Mobil SHC 629美孚檢測報告
24小時在線聯系人 電話：13380324305江小姐 Remotely located gearboxes, where oil change-out is difficult Low temperature applications, such as ski lifts where seasonal oil changes can be avoided Mixer roll bearings ａnd roll neck bearings where high temperatures are encountered Plastic calenders Severe centrifuge applications, including marine centrifuges Railroad A/C Traction Drives
Mobil SHC 600 Series
卓越性能齒輪與軸承油江女士13380324305
Mobil Glygoyle™ Series
Mobil Industrial, United States
Mobil SHC™ 600 Series
Mobil Industrial, United States
View the Mobil SHC 600 Series
Exceptional Performance Gear ａnd Bearing Oils
Product DescriptionMobil SHC™ 600 Series lubricants are exceptional performance gear ａnd bearing oils designed to provide outstanding service in terms of equipment protection, oil life ａnd problem-free operation helping to enable increased customer productivity. These scientifically engineered oils are formulated using the latest proprietary ａnd patent pending Mobil SHC technology to provide outstanding ａnd balanced performance in demanding applications at high ａnd low temperatures. Mobil SHC 600 products feature excellent low temperature properties, as well as improved air release performance in the lower viscosity grades. These products are resistant to mechanical shear, even in heavily loaded gear ａnd high shear bearing applications, so that there is virtually no loss of viscosity.Mobil SHC 600 Series products have low traction coefficients relative to mineral oils which derive from the molecular structure of the base stocks used. This results in low fluid friction in the load zone of non-conforming surfaces such as gears ａnd rolling contact bearings. Low fluid friction produces lower operating temperatures ａnd improved gear efficiency, which translates into reduced power consumption. Mobil SHC 600 Series products have demonstrated up to 3.6% improvement in energy efficiency in controlled laboratory testing(*). Mobil SHC 600 Series formulation also provides excellent resistance to oxidation ａnd deposit formation at elevated temperatures, as well as exceptional resistance to rusting ａnd corrosion, antiwear, demulsibility, foam control ａnd air release properties, ａnd multi-metal compatibility. Mobil SHC 600 Series oils maintain good compatibility with seals ａnd other materials used in equipment normally lubricated with mineral oils.Mobil SHC 600 Series lubricants are suitable for use in a wide range of equipment, not only as high temperature problem solvers, but also because of the other benefits they offer.
(*) Energy efficiency relates solely to the performance of Mobil SHC 600 when compared to conventional (mineral) reference oils of the same viscosity grade in circulating ａnd gear applications. The technology used allows up to 3.6% efficiency compared to the reference when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions ａnd application. Features ａnd BenefitsThe Mobil SHC brand of lubricants are recognized ａnd appreciated around the world for their innovation ａnd outstanding performance. These synthetic products, molecularly designed ａnd pioneered by our research scientists, embody the continuing commitment to using advanced technology to provide outstanding lubricant products. The development of Mobil SHC 600 Series was preceded by close contacts between our scientists ａnd application specialists with key Original Equipment Manufacturers (OEMs) to ensure that the products provide exceptional performance in the continually evolving industrial equipment designs.Our work with key equipment builders has helped confirm the results from our own laboratory ａnd rig tests showing the exceptional performance of Mobil SHC 600 Series lubricants. Not least among the benefits, shown in work with OEMs, is the potential for energy efficiency improvements up to 3.6% relative to mineral oils (*). These benefits are particularly evident in equipment with a high level of mechanical losses, such as high ratio worm gears.To develop the latest Mobil SHC technology for Mobil SHC 600 Series oils, our product formulation scientists chose ｓelect base oils because of their exceptional thermal/oxidative resistance potential ａnd combined them with a balanced additive system, which complements the inherent benefits of the base oils to provide excellent oil life, deposit control ａnd resistance to thermal/oxidative ａnd chemical degradation. This formulation approach provides low temperature fluidity characteristics exceeding that of many conventional mineral products ａnd is a key benefit for remote, low ambient temperature applications. Mobil SHC 600 Series oils offer the following features ａnd potential benefits:
(*) Energy efficiency relates solely to the performance of Mobil SHC 600 when compared to conventional (mineral) reference oils of the same viscosity grade in circulating ａnd gear applications. The technology used allows up to 3.6% efficiency compared to the reference when tested in a worm gearbox under controlled conditions. Efficiency improvements will vary based on operating conditions ａnd application. ApplicationsWhile Mobil SHC 600 Series are generally compatible with mineral oil based products, admixture may detract from their performance. Consequently it is recommended that before changing a system to one of Mobil SHC 600 Series products, it should be thoroughly cleaned out ａnd flushed to achieve the maximum performance benefits. Mobil SHC 600 Series oils are compatible with most NBR, FKM ａnd most other elastomeric seal materials that are used with mineral oils. There is the potential for substantial variations in the elastomers. For best results, consult your equipment supplier, seal manufacturer, or your local company representative to verify compatibility.Mobil SHC 600 Series lubricants are recommended for use in a wide variety of gear ａnd bearing applications where high or low temperatures are encountered or where operating temperatures or bulk oil temperatures are such that conventional lubricants give unsatisfactory life, or where improved efficiency is desired. They are particularly effective in applications where the maintenance costs of component replacement, system cleaning ａnd lubricant changes are high. Specific applications require selection of the appropriate viscosity grade ａnd include:
| Features | Advantages ａnd Potential Benefits |
| Superb high temperature thermal/oxidation resistance | Helps extend equipment high temperature operating capability Long oil life, helps reduce maintenance costs Helps minimize deposits to enable trouble-free operation ａnd long filter life |
| High Viscosity Index ａnd absence of wax | Maintains viscosity ａnd film thickness at high temperatures Helps enable exceptional low temperature performance, including start-up |
| Low traction coefficient | Helps reduce friction ａnd increase efficiency in sliding mechanisms such as gearing, with potential for reduced power consumption ａnd lower steady-state operating temperatures. Helps minimize the effects of micro slip in rolling contact bearings to potentially extend rolling-element life |
| High load carrying capability | Helps protects equipment ａnd extends life; helps minimize unexpected downtime ａnd extends service periods |
| Balanced additive combination | Provides excellent performance in terms of rust ａnd corrosion prevention, water separability, foam control ａnd air release performance enabling problem-free operation in a wide range of industrial applications, ａnd reduced operating costs |
| Mobil SHC 600 Series meets or exceeds the requirements of: | 624 | 625 | 626 | 627 | 629 | 630 | 632 | 634 | 636 | 639 |
| AGMA 9005 E02 | X | X | X | X | X | X | X | X | X | X |
| DIN 51517-3 CLP | X | X | X | X | X | X | X | |||
| ISO 12925-1 CKB | X | |||||||||
| ISO 12925-1 CKD | X | X | X | X | X | X | X | X | X |
| Mobil SHC 600 Series has the following builder approvals: | 624 | 625 | 626 | 627 | 629 | 630 | 632 | 634 | 636 | 639 |
| Fives Cincinnati | P-63 P-80 | P-76 | P-77 | P-34 | P-78 | |||||
| SIEMENS AG Flender gear units, T 7300, Table A-c, Flender Code No. | A36 | A35 | A34 | A33 | A32 | A31 | ||||
| SEW Eurodrive: SEW IG CLP HC SEW SG CLP HC | 32 32 | 68 68 | 150 150 | 220 220 | 320 | 460 460 | 680 | 1000 |
| Mobil SHC 600 Series | 624 | 625 | 626 | 627 | 629 | 630 | 632 | 634 | 636 | 639 |
| ISO Viscosity Grade | 32 | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 | 1000 |
| Viscosity, ASTM D 445 | ||||||||||
| cSt @ 40ºC | 32 | 46 | 68 | 100 | 150 | 220 | 320 | 460 | 680 | 1000 |
| cSt @ 100ºC | 6.3 | 8.5 | 11.6 | 15.3 | 21.1 | 28.5 | 38.5 | 50.7 | 69.0 | 98.8 |
| Viscosity Index, ASTM D2272 | 148 | 161 | 165 | 162 | 166 | 169 | 172 | 174 | 181 | 184 |
| Pour Point, ºC, ASTM D5950 | -57 | -54 | -51 | -45 | -39 | -36 | -33 | -30 | -30 | -27 |
| Flash Point, ºC, ASTM D 92 | 236 | 225 | 225 | 235 | 220 | 220 | 225 | 228 | 225 | 222 |
| Density @ 15°C (60°F) (g/cc) ASTM D4052 | 0.85 | 0.85 | 0.86 | 0.86 | 0.86 | 0.87 | 0.87 | 0.87 | 0.87 | 0.87 |
| Appearance, visual | Orange | Orange | Orange | Orange | Orange | Orange | Orange | Orange | Orange | Orange |
| TOST, ASTM D 943 mod, hours | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ | 10,000+ |
| RPVOT, ASTM D 2272, minutes | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 | 2500 |
| Rust protection, ASTM D665B, Synthetic Sea Water | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass | Pass |
| Water Separability, ASTM D1401,Min. to 37 ml water @ 54ºC | 10 | 15 | 15 | - | - | - | - | - | - | - |
| Water Separability, ASTM D1401,Min. to 37 ml water @ 82ºC | - | - | - | 15 | 20 | 20 | 20 | 20 | 20 | 25 |
| Copper Corrosion, ASTM D130, 24 hrs @ 121ºC | 1B | 1B | 1B | 1B | 1B | 1B | 1B | 1B | 1B | 1B |
| Foam Test, ASTM D892, Seq I,II,IIITendency / Stability, ml/ml | 15/0, 20/0, 25/0 | 10/0, 30/0, 10/0 | 10/0, 20/0, 10/0 | 0/0, 10/0, 0/0 | 0/0, 0/0,0/0 | 0/0, 10/0, 0/0 | 0/0,0/0,0/0 | 0/0,0/0,0/0 | 0/0,0/0,0/0 | 0/0, 0/0, 0/0 |
| FZG gear scuffing test, A/8.3/90, ISO 14635-1 (mod), Failure Stage | 11 | 12 | 12 | 12 | 13 | 13+ | 13+ | 13+ | 13+ | 13+ |
| FAG FE8 Bearing Wear Test 7.5/80-80 ((DIN 51819-3) Roller Wear (mg) | - | - | - | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
