CEDAR思達數顯扭力扳手專場,CEDAR思達數顯扭力扳手商家多、資料全面阿儀網

DIW-20CEDAR思達數顯扭力扳手

Screw tightening control

仠 DIGITAL TORQUE WRENCH DIW-120/75/20/15

（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple

＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable）＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB）＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.

NEW丂DEVELOPMENT Wrench head awivels 300亱

Specification		DIW-15	DIW-20	DIW-75	DIW-120
Measuring range N丒m （at the time of Track）		0.20 - 15 N	0.20 - 20 N	0.20 - 75 N丒m	2.0 - 120 N丒m
		2.0乣150 kgf丒cm	2.0乣200 kgf丒cm	2.0乣750 kgf丒cm	20乣1200 kgf丒cm
		2.0乣130 lbf丒in	2.0乣180 lbf丒in	2.0乣650 lbf丒in	20乣1040 lbf丒in
Accuracy		亇0.5% （F/S）（199 or less digit亇1digit）		亇0.5% （F/S）（499 or less digit亇3digit）	亇0.5% （F/S）（199 or less digit亇1digit乯
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （rightleft）
Measuring mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value （ Used for Zero-Adjustment ）
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 160 second
Decision function	Setting of torque value	Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format （Baud rate : 19200）
	Data memory	800 data / ten channels data
A setup of the number of counts		One to 99 count （count in a direction with a bundle）
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 5hours
Continunous working time		12 hours
Outside size		冇34（grip）亊236（L）	冇34（grip）亊235（L）	冇34（grip）亊320（L）	冇34（grip）亊445（L）
Weight （about）		430g	470g	620g	830g
Socket engagement		6.35 square, including steel ball	9.5 square, including steel ball		12.7 square, including steel ball
Attachment		-	One-way socket
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

DIW-75CEDAR思達數顯扭力扳手

Screw tightening control

仠 DIGITAL TORQUE WRENCH DIW-120/75/20/15

（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple

＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable）＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB）＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.

NEW丂DEVELOPMENT Wrench head awivels 300亱

Specification		DIW-15	DIW-20	DIW-75	DIW-120
Measuring range N丒m （at the time of Track）		0.20 - 15 N	0.20 - 20 N	0.20 - 75 N丒m	2.0 - 120 N丒m
		2.0乣150 kgf丒cm	2.0乣200 kgf丒cm	2.0乣750 kgf丒cm	20乣1200 kgf丒cm
		2.0乣130 lbf丒in	2.0乣180 lbf丒in	2.0乣650 lbf丒in	20乣1040 lbf丒in
Accuracy		亇0.5% （F/S）（199 or less digit亇1digit）		亇0.5% （F/S）（499 or less digit亇3digit）	亇0.5% （F/S）（199 or less digit亇1digit乯
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （rightleft）
Measuring mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value （ Used for Zero-Adjustment ）
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 160 second
Decision function	Setting of torque value	Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format （Baud rate : 19200）
	Data memory	800 data / ten channels data
A setup of the number of counts		One to 99 count （count in a direction with a bundle）
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 5hours
Continunous working time		12 hours
Outside size		冇34（grip）亊236（L）	冇34（grip）亊235（L）	冇34（grip）亊320（L）	冇34（grip）亊445（L）
Weight （about）		430g	470g	620g	830g
Socket engagement		6.35 square, including steel ball	9.5 square, including steel ball		12.7 square, including steel ball
Attachment		-	One-way socket
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

DIW-120CEDAR思達數顯扭力扳手

Screw tightening control

仠 DIGITAL TORQUE WRENCH DIW-120/75/20/15

（1） Unify the display sectiona frame. It became stronger. （2） Display Measurement Mode, Unit, Etc. on Display Section. （3） Data Output is USB Form. （4） Prepare each button in accordance with operation. Button operation became simple

＊The torque screwdriver is Ergonomiclight weight, yet ruggedly constructed ＊Available in: lb-in, kg-cmN-m ＊Peak, Real TimePeak Down measuring mode （selectable）＊800 data memory. ＊Programmable HighLow set points with both audible beepGreen/Red LED indicator for uniform torque tightening or GO/NO GO testing ＊Programmable screw tightening counter ＊Programmable Auto Zero function resets unit to zero for easy operation ＊Both CWCCW operation ＊ASCII format output（USB）＊Runs on internal NiCad batteries （for 12 hours） Auto shut-off after 10 min. of non-use ＊ AC chargercarrying case included.

NEW丂DEVELOPMENT Wrench head awivels 300亱

Specification		DIW-15	DIW-20	DIW-75	DIW-120
Measuring range N丒m （at the time of Track）		0.20 - 15 N	0.20 - 20 N	0.20 - 75 N丒m	2.0 - 120 N丒m
		2.0乣150 kgf丒cm	2.0乣200 kgf丒cm	2.0乣750 kgf丒cm	20乣1200 kgf丒cm
		2.0乣130 lbf丒in	2.0乣180 lbf丒in	2.0乣650 lbf丒in	20乣1040 lbf丒in
Accuracy		亇0.5% （F/S）（199 or less digit亇1digit）		亇0.5% （F/S）（499 or less digit亇3digit）	亇0.5% （F/S）（199 or less digit亇1digit乯
Display		The 4 figures digital display of LCD
The measurement direction		CW-CCW （rightleft）
Measuring mode	P-P Peak	Holding Peak Load Value
	T-R Track	Showing Real time torque value （ Used for Zero-Adjustment ）
	P-D Peak down	Holding Load Value at the moment to change from upward to downword
	C Real-time output	Load torque value is outputted every about1/ 160 second
Decision function	Setting of torque value	Programmable HighLow setpoints with both audible beepGreen/ Red LED indicator for uniform torque tightening or GO/NO GO testing
The Maximum, the minimum,the average value		Displays, memoryoutput the data number, the maximum, the minimum,the average value of the measured value to 30 data. It can save by a maximum of 10 channels.
Data spec.	Data transfer	ASCII format （Baud rate : 19200）
	Data memory	800 data / ten channels data
A setup of the number of counts		One to 99 count （count in a direction with a bundle）
Auto power save		10 minutes no use, automatically switch off.
Charging time		From empty - less than 5hours
Continunous working time		12 hours
Outside size		冇34（grip）亊236（L）	冇34（grip）亊235（L）	冇34（grip）亊320（L）	冇34（grip）亊445（L）
Weight （about）		430g	470g	620g	830g
Socket engagement		6.35 square, including steel ball	9.5 square, including steel ball		12.7 square, including steel ball
Attachment		-	One-way socket
Accessories （one piece each）		AC/DC adaptor
		An inspection report, a proofreading certificate, a traceability system figure

最新產品

免费看国产曰批40分钟视频,九级黄色视频,美女涩视频网站,一级中文免费无码专区,精品911国产高清在线观看,日本日本乱码伦视频在线观看,精品国产911在线观看

DIW-20CEDAR思達數顯扭力扳手

DIW-75CEDAR思達數顯扭力扳手

DIW-120CEDAR思達數顯扭力扳手